Description
The Makita T4TKIT-4344 18V 8-Piece Cordless Power Tool Kit puts 8 cordless tools on one 18V platform, supplied with 3 x 5.0Ah batteries and a charger, so you can move from drilling to cutting without changing systems.
Features:
DHP482Z Combi Drill:
Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
Ergonomic soft grip handle
Compact overall length of 198mm
Single sleeve keyless chuck
Lightweight design
Battery protection circuit
All metal gears
DTD152Z Impact Driver:
Electric Brake
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
High rotation speed
One-touch bit installation
Ergonomically designed soft grip handle
Compact overall length of 137mm
Lightweight design
Battery protection circuit
Belt clip
DSS611Z Circular Saw:
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Double safety trigger.
High comfort grips.
Removable dust nozzle.
DJV180Z Jigsaw :
Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain.
The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on.
3 orbital settings + straight cut.
Blower will clear the pencil line of dust.
Lightweight and compact.
Tool-less blade change – push in lock system enables very fast blade changes.
LED light will illuminate your cut line.
Smooth and powerful cutting at the high stroke speed at 2,600 spm.
Double insulated.
Soft start.
DGA452Z Angle Grinder:
Electric brake
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip
DTM50Z Multi Tool:
Thumb On/Off switch, positioned for ease of use when holding body of machine.
Hex wrench holder on body.
Variable speed control dial.
Dust extraction attachment.
Accessories can be installed at 30º increments, across 360º.
Uses OIS interface.
DHR202Z Hammer Drill:
3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
Chisel rotates 360° with 40 different positions to get the best working
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light
Rotary hammer action
Rotary only action
Variable speed trigger
DJR186Z Reciprocating Saw:
Tool-less blade change
Trigger switch with lock-off lever
Electric brake
Variable speed
Ergonomically designed handle
Newly designed crank mechanism for higher efficiency
High power
Comes with:
3 x 5.0Ah BL1850 Batteries
1 x DC18RD/2 Charger
1 x 26″ Tool Bag
Product Specification:
DHP482Z Combi Drill:
| Barcode | 0088381699051 |
|---|---|
| Battery Type | Li-ion |
| Voltage | 18V |
| Max. in Masonry | 13mm |
| Max. in Steel | 13mm |
| Max. in Wood | 38mm |
| Max. Fastening Torque | S/H 36/62 Nm |
| Chuck Capacity | 1.5 – 13mm |
| Torque Settings | 21 + Drill |
| No Load Speed Hi | 0 – 1,900rpm |
| Low | 0 – 600rpm |
| Blows per Minute Hi | 0 – 28,500bpm |
| Low | 0 – 9,000bpm |
DTD152Z Impact Driver:
| Barcode | 0088381699099 |
|---|---|
| Battery Type | Li-ion |
| Voltage | 18V |
| Driving Shank | 6.35mm (1/4″ Hex) |
| Machine Screw | M4-M8 |
| Standard Bolt | M5-M16 |
| High Tensile Bolt | M5-M12 |
| Coarse Thread | 22-125mm |
| Impacts per minute | 0-3500 ipm |
| No Load Speed | 0-2900 rpm |
| Max Tightening Torque | 165Nm |
| Sound Pressure | 93 dB(A) |
| Sound Power | 104 dB(A) |
| Sound K Factor | 3 dB(A) |
| Vibration | 10.5 m/s² |
| Vibration K Factor | 1.5 m/s² |
DSS611Z Circular Saw:
Barcode: 0088381663014
Voltage – 18V
Depth of Cut @ 90° – 57mm
Blade Diameter – 165mm
Depth of Cut @ 45º – 40mm
Depth of Cut @ 50° – 36mm
Bore Diameter – 20mm
Noise sound pressure – 91 dB(A)
Noise sound power – 102 dB(A)
Noise K factor – 3 dB(A)
No Load Speed – 3700 rpm
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Chipboard – 2.5 m/sec²
DJV180Z Jigsaw:
Barcode – 0088381662710
Voltage – 18V
Max in steel – 10mm
Max in wood – 135mm
Strokes per Minute – 0-2600 spm
Stroke Length – 26mm
Noise sound pressure – 78 dB(A)
Noise K factor – 3 dB(A)
Vibration K factor – 1.5 m/sec²
Vibration Cutting Chipboard – 8 m/sec²
Vibration Cutting Sheet Metal – 3.5 m/sec²
DGA452Z Angle Grinder:
| Barcode | 0088381660112 |
|---|---|
| Grinding Wheel | 4-1/2″ / 115mm |
| Max Wheel Diameter | 4-1/2″ 115mm |
| No Load RPM | 10,000 |
| Watt Hours | 54.0 |
| Overall Length | 12-1/2″ |
DTM50Z Multi Tool:
Barcode: 0088381666022
Battery Type – Lithium-ion
Charging Time – 22 min
Voltage – 18V
Oscillation Angle – 3.2 º
Oscillations per Minute – 6000 – 20000
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Metal – 5 m/sec²
Vibration: Cutting Wood – 9.5 m/sec²
Vibration: Chiselling – 7.5 m/sec²
Vibration: Sanding – 2.5 m/sec²
DHR202Z Hammer Drill:
Voltage: 18v
Shank Type: SDS+ Plus
Capacity in Concrete: 20mm
Capacity in Steel: 13mm
Capacity in Wood: 26mm
Impacts per Minute: 0-4,000 ipm
Impact Energy: 2.0 J
No Load Speed: 0-1,100 rpm
Overall Length: 358 mm
NOISE & VIBRATION:
Vibration: Drilling: 3 m/sec²
Vibration: Chiselling: 11 m/sec²
Vibration: Hammer Drilling: 145 m/sec²
Vibration K Factor: 15 m/sec²
Noise Sound Pressure: 87 dB(A)
Noise Sound Power: 98 dB(A)
Noise K Factor: 3 dB(A)
DJR186Z Reciprocating Saw:
Barcode – 0088381806640
Battery Type – Lithium-ion
Voltage – 18 V
Capacity in Wood – 255 mm
Capacity in Mild Steel Pipe – 130 mm
Strokes per Minute – 0 – 2,800 spm
Stroke Length – 32 mm
Noise sound pressure – 84 dB(A)
Noise sound power – 95 dB(A)
Noise K factor – 3 dB(A)
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Wood – 12.5 m/sec²
Vibration: Cutting Chipboard – 13.0 m/sec²
**images for illustrative purposes only – please refer to description and specification for full details of product**
