Description
The Makita T4TKIT-7316 18V 6-Piece Cordless Power Tool Kit puts 6 cordless tools on one 18V platform, supplied with 3 x 5.0Ah batteries and a charger, so you can move from drilling to cutting without changing systems.
Kit Includes
DHP482Z 18V LXT Combi Drill
Makita DTD152Z 18V LXT Impact Driver
Makita DHR202Z 18V Rotary Hammer SDS Plus
Makita DGA452Z 18V LXT Angle Grinder
Makita DTM50Z 18V LXT Multi-Tool
Makita DML815 18V LXT Torch
Features
DHP482 Combi Drill
Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
Ergonomic soft grip handle
Compact overall length of 198mm
Single sleeve keyless chuck
Lightweight design
Battery protection circuit
All metal gears
DTD152 Impact Driver
Compact design with a short overall length of 138mm
One-touch bit installation
Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time.
LED job light with pre-glow and afterglow functions
Enhanced dust and drip-proof performance
New compact charger
Compact and lightweight, 4-pole motor
Ergonomically designed handle
Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery.
Battery fuel gauge
DHR202 Rotary Hammer
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
LED job light with afterglow.
One-touch sliding chuck for easy bit changes.
Triple operation mode: Rotary only, hammer only and rotary hammer.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
DGA452 Angle Grinder
Electric brake
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip
DTM50Z Multi-Tool
Thumb On/Off switch, positioned for ease of use when holding body of machine.
Hex wrench holder on body.
Variable speed control dial.
Dust extraction attachment.
Accessories can be installed at 30º increments, across 360º
Uses OIS interface.
DML815 Torch
12 pivoting positions with 0 to 170º swivel range
4 LED bulb for maximum illumination
Lightweight and compact for work in tight spaces
Accessory strap enables tool suspension for hands-free work
54 hours of continuous run-time
Comes With
1 x DC18RD/2 Charger
3 x 5.0Ah BL1850 Li-Ion Batteries
1 x 26″ Tool Bag
1 x B-53811 100 Piece Drill & Screwdriver Bit Set
B-53811 Contents:
1 x Magnetic bit holder
1 x 2 x holesaws (32 and 38mm)
1 x Holesaw arbor
1 x Countersink
3 x wrench bits (6, 8 and 10mm)
2 x flat wood bits (12 and 16mm)
6 x HSS drill bits (2, 2 x 3, 4, 5 and 6mm)
7 x 3-point wood drill bits (2 x 3, 4, 2 x 5, 6 and 8mm)
4 x masonry drill bits (2 x 6, 7 and 8mm)
12 x 50mm screwdriver bits (5 x Philips (PH1, 3 x PH2 and PH3)
5 x Pozi (PZ1, 3 x PZ2 and PZ3) and 2 x Torx (T20 and T30))
1 x tic-tac tub containing 25 x 25mm PZ2 bits and 36 x 25mm screwdriver bits (6 x Torx (T10, T15, T20, T25, T30 and T40)
7 x Philips (2 x PH1, 3 x PH2 and 2 x PH3)
4 x slotted (4, 4.5, 5 and 7mm)
4 x Hex (4, 5, 6 and 7mm) and 15 x Pozi (2 x PZ1, 11 x PZ2 and 2 x PZ3)
Product Specifications
Part No.: T4TKIT-1297
Barcode: 8906763717082
DHP482 Combi Drill
| Barcode | 0088381699051 |
|---|---|
| Battery Type | Li-ion |
| Voltage | 18V |
| Max. in Masonry | 13mm |
| Max. in Steel | 13mm |
| Max. in Wood | 38mm |
| Max. Fastening Torque | S/H 36/62 Nm |
| Chuck Capacity | 1.5 – 13mm |
| Torque Settings | 21 + Drill |
| No Load Speed Hi | 0 – 1,900rpm |
| Low | 0 – 600rpm |
| Blows per Minute Hi | 0 – 28,500bpm |
| Low | 0 – 9,000bpm |
DTD152 Impact Driver
Battery Type – Lithium-ion
Voltage – 18v
Electric Brake
Variable Speed Control
Impacts – 0-3200 ipm
Drive shank Hex – 6.35mm (1/4″)Reverse switch
Standard Bolt – M5-M14
Joblight
No Load Speed – 0-2300rpm
Max Torque – 160Nm
Vibration: Fastening Bolt – 15.5 m/sec²
Vibration K factor – 2 m/sec²
DHR202 Rotary Hammer
Battery Type – Lithium-ion
Charging Time – 22min
Voltage – 18v
Max in concrete – 20mm
Max. in steel – 13mm
Max. in wood – 26mm
Impact energy – 2.0J
Blows per minute – 0-4000bpm
Noise sound pressure – 87dB(A)
Noise sound power – 98dB(A)
Noise K factor – 3dB(A)
No Load Speed – 0-1100rpm
Vibration: Drilling – 3 m/sec²
Vibration K factor – 1.5 m/sec²
Vibration: Hammer Drilling – 14.5 m/sec²
Vibration: Chiselling – 11 m/sec²
DGA452 Angle Grinder
| Grinding Wheel | 4-1/2″ / 115mm |
|---|---|
| Cut-Off Wheel | 4-1/2″ |
| Wire Cup Brush | 3-1/2″ / 115mm |
| Sanding Disc | 4-1/2″ / 115mm |
| No Load RPM | 10,000 |
| Watt Hours | 54.0 |
| Spindle Thread | 5/8″ – 11 UNC |
| Overall Length | 12-1/2″ |
DTM50Z Multi-Tool
Battery Type – Lithium-ion
Charging Time – 22 min
Voltage – 18v
Oscillation Angle – 3.2 º
Oscillations per Minute – 6000 – 20000
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Metal – 5 m/sec²
Vibration: Cutting Wood – 9.5 m/sec²
Vibration: Chiselling – 7.5 m/sec²
Vibration: Sanding – 2.5 m/sec²
DML815 Torch
| Part Number | DML815 |
|---|---|
| Barcode | 0088381886970 |
| Continuous Runtime | 6.0Ah – 54 hours |
| Battery | 18V LXT Lithium-ion |
| Lumens | 160 |
| Luminous Flux | 160lm |
| Illuminance at 1m | 3,000lx |
| Overall Length | 272mm |
